Newsroom - steel casting, slag pot, press frame ,grinding roller, girth gear-Great Wall Steel Casting Company

Newsroom

The main role of heat treatment in the girth gear of rotary kiln

2018-12-28

The girth gear is a key component on the rotary kiln and requires good comprehensive mechanical properties and tooth surface wear resistance to ensure stable operation of the rotary kiln When the metallurgical factors such as smelting and pouring are determined, the metallographic stru
Vertical mill grinding roller tire, to solve the wear problem fundamentally

2018-12-24

As a key component of vertical mill, the grinding roller often grinds the materials containing some hard impurities, such as quartz stone and iron Due to the complex composition of the milled material, the grinding roller is prone to serious wear during the long-term grinding process
CHAENG, focused on High-end casting + equipment, to be green steel casting factory

2018-12-20

On the afternoon of December 15, Zhao Yingmin, deputy minister of the Ministry of Ecology and Environment, came to CHAENG to investigate and guide the work Focusing on the development of environmental protection work and the impact of environmental protection work on the development o
Safe operation of rotary kiln, requires reliable support rollers

2018-12-18

Rotary kiln is the core equipment in the industries of cement, building materials, metallurgy, and chemical engineering, etc The production loss caused by the suspension of production is huge, and the accident loss is dozens of times that of normal shutdown maintenance Therefore, the
Quality assurance measures of CHAENG rotary kiln thrust roller

2018-12-14

In order to ensure the up and down movement of the rotary kiln, all rotary kilns are equipped with thrust roller device In the event of a problem with the rotary kiln thrust roller, the company will be forced to stop the kiln, which will cause significant economic losses to the
CHAENG backup roll bearing chock for rolling mill

2018-12-13

The backup roll bearing chock is the core component of the rolling mill, requiring high precision and complicated process In order to ensure the performance and quality, the technology department of CHAENG carries out a detailed analysis of the processing technology of the bearing cho
How CHAENG to choose large girth gear materials?

2018-12-13

In the cement production line, the girth gear is an important component for the core equipment ball mill and rotary kiln, so the quality of the girth gear are directly related to the normal operation of the entire production line The quality of the girth gear is mainly related to
Slag pots used in copper mining enterprise - CHAENG slag pots

2018-12-11

The CHAENG slag pots can be used not only in steel plants, but also in metallurgical work of copper mines As early as July 2015, the representative of Chile s largest copper mining company came to CHAENG to visit and inspect large steel casting products The Chilean copper mining company representatives expressed appreciation for the advanced casting technology of CHAENG slag pots It is hoped that both parties can cooperate on large steel casting products such as slag pots

39

PRODUCTS

CONTACT

Tel: +8615290747879
Whatsapp: +8615290747879
E-mail: casting@chaeng.co
Skype : GreatWall1958

casting@chaeng.co +8615290747879